STMicroelectronics Voltage Adaptor Board for STLINK-V3SET
The B-STLINK-VOLT board is an add-on module to the STLINK-V3SET for voltage adaptation of STM32 microcontroller targets running from 3.3 V to 1.65 V or less.
When used as an STM32 debug probe (JTAG / SWD / SWV / VCP) via the STDC14 connector, the module can be packaged directly into the original STLINK-V3SET housing. It can also be inserted between the STLINK-V3SET main board (MB1441) and its reference adapter board (MB1440) when providing access to bridge signals and other connectors.
The STM8 target does not require a B-STLINK-VOLT and can be voltage adapted on the reference adapter board (MB1440) included with the STLINK-V3SET!
Main Features
- 1.65 V-3.3 V voltage adapter board for STLINK-V3SET
- Input/output level shifters for STM32 debug SWD, SWV and JTAG signals
- Input/output level shifters for VCP virtual COM port (UART) signals
- Input/output level shifters for bridge (SPI/UART/I2C/CAN/GPIOs) signals.
- Enclosed housing when using STDC14 connectors (STM32 SWD, SWV, and VCP)
- Compatible with the STLINK-V3SET adapter board (MB1440) for STM32 microcontroller JTAG and bridges
- Operating temperature from 0°C to 50°C
If you like this article, may wish to continue to pay attention to our website Oh, later will bring more exciting content. If you have product needs, please contact us
